http:/www.robives.com/mechs
Lower
Higher
Constraint Equation for a Slider-Crank
For slider-crank linkages the constraint equation can take
several forms. If the slider is an input or output link, then the
constraint equation is given by the distance betwe

Flow measurement experiment
The experiment will be including 3 devices which are the Venturi Meter, Flow Nozzle and the Plate
Orifice. Three devices will be put on an align system begin with a water source. The experiment will be
repeated 9 times and each

RelativeMotionAnalysisusingRotatingAxes
Limitation of using translating coordinate system to do
Relative Motion Analysis for velocity and acceleration
Determines the motion of the points on the same rigid body
Determines the motion of the points located o

Mid Semester Spring 2015Main Exam
STUDENT NUMBER:
SURNAME:
(FAMILY NAME)
OTHER NAMES:
This paper and all materials issued must be returned at the end of the examination.
They are not to be removed from the exam centre.
Examination Conditions:
It is your r

SUBJECT OUTLINE
48240 Design and Innovation Fundamentals
Course area
UTS: Engineering
Delivery
Autumn 2016; City
Credit points 6cp
Requisite(s)
33130 Mathematical Modelling 1 AND 48230 Engineering Communication
These requisites may not apply to students i

Comes at no
extra cost
with your
GIO CTP
Green
Slip
NSW CTP Insurance
Driver Cover Plus
Guide to Driver Cover Plus
Cover provided by Driver Cover Plus
This document provides some information about CTP insurance and GIOs
Driver Cover Plus Policy. Driver Co

Lect.No. and Date
0
(14-18 March)
Important due date
Online Quiz 1 due on
23:59pm, 20 Mar
1*
(23 Mar)
2
(30 Mar and 1 Apr)
3
(6 and 8 Apr)
4
(13 and 15 Apr)
No lecture. Students are expected to review the prerequisite subjects through
watching online vide

Machine Dynamics 48640
Assignment 2
(Kinematics of Rigid Bodies, Acceleration Equations)
Autumn 2016
1.
Assignment 1 should be submitted in both hardcopy and softcopy by 5:00 pm on Friday in Week 6
(May 6, 2016). Late submission of an assessment task will

Karl Wiegers Describes 10 Requirements Traps to Avoid1
Karl E. Wiegers
Process Impact
www.processimpact.com
The path to quality software begins with excellent requirements. Slighting the processes of
requirements development and management is a common cau

PLEASE READ ALL OF THIS BEFORE ORDERING
FISHFROM OVERSEAS!
Adjustments to terms and conditions effective from 1st
February 2016
There are 5 main stages in importing fish from Overseas
Breeders. (Aquabid/EBay/Facebook/Private sellers)
We can import Gupp

SUBJECT OUTLINE
48331 Mechanics of Solids
Course area
UTS: Engineering
Delivery
Summer 2015/16; City
Subject
Fields of practice: Civil Engineering program
classification
Credit points 6cp
Requisite(s)
48321 Engineering Mechanics OR 48620 Fundamentals of M

MITRE Systems Engineering Guide
Requirements Engineering
Definition: A requirement is a singular documented needwhat a particular product or service should be or how it should perform. It is a statement that identifies a
necessary attribute, capability, c

Weir flow measurement
A weir is usually used in open channel flow measurement. The change in water depth will illustrate the
flow rate follow a given formula. In the experiment, there are two type of weir are used for measuring: v
notch weir and rectangul

SCHOOL OF CHEMICAL ENGINEERING
CEIC3001 Advanced Thermodynamics and Separation
Tutorial 4
Question 1
Solute A is to be stripped from a liquid solvent by contacting the liquid with a pure gas
in a multistage countercurrent stripping column. The liquid ente

Machine Dynamics 48640
Assignment 1
(Kinematics of Rigid Bodies, Velocity Equations)
Autumn 2016
1. Assignment 1 should be submitted in both hardcopy and softcopy by 5:00 pm on Friday in Week 4
(April 15, 2016). Late submission of an assessment task will

48640
Machine Dynamics
Tutorial Problems
WEEK 3
The crankshaft AB turns with a clockwise angular velocity of 10 rad/s. Determine the
velocity of the piston at the instant shown.

48640
Machine Dynamics
Tutorial Problems
WEEK 5
Problem III
Given:
The pendulum consists of a 5 kg plate and
a 3 kg slender rod.
Find:
The radius of gyration of the pendulum
about an axis perpendicular to the screen
and passing through point G.
Plan:
Dete

16 - 9. Due to an engine failure, the missile is rotating at a) = 3 rad/s, while its mass center G is moving upward
at 200 m/s. Determine the velocity of Its nose B at this instant.
Solution
Apply the relative velocity equation using Cartesian vectors.

BPH Fluid Mechanics
Set 1
Q.1.1
Q.1.2
In the dry adiabatic model of the atmosphere, in addition to the ideal gas equation, air
is also assumed to obey the equation
p/n = constant
where n = 1.4. If the conditions at sea level are standard (101.3 kPa, 15C),

SUBJECT OUTLINE
48641 Fluid Mechanics
Course area
UTS: Engineering
Delivery
Autumn 2016; City
Subject
Fields of practice: Mechanical Engineering program
classification
Credit points 6cp
Requisite(s)
33230 Mathematical Modelling 2
Result type
Grade and mar

CTP AT-FAULT
DRIVER
COVER
POLICY BOOKLET
NSW
This Policy Booklet was prepared 13 November 2015 and applies to all
policies with a renewal or start date on or after 1 February 2016. The
information in this Policy Booklet is current at that date. From time

SCHOOL OF CHEMICAL ENGINEERING
CEIC3001 Advanced Thermodynamics and Separation
Tutorial 3
Question 1
The following table contains VLE data for the acetone (1)/methanol (2) system at 55C.
P (kPa)
68.728
77.524
82.528
90.088
96.365
x1
0
0.0858
0.1452
0.2787

Mid-semester Autumn2015Main Exam
STUDENT NUMBER:
SURNAME:
(FAMILY NAME)
OTHER NAMES:
This paper and all materials issued must be returned at the end of the examination.
They are not to be removed from the exam centre.
Examination Conditions:
It is your re