Tutorial Problem- 2 ON ChE 328 (Process Instrumentation & Control) Semester-2, 2010 Solve all the problems in class itself (may be qualitative answer)
2.1.Consider the two systems shown in Figure PII.1. System 1 differs from system 2 by the fact that the
1
CLASS PROBLEM-5, ChE422 (Ad. Sepro, 2nd Sem)
On
Adsorption
Prob 1
Francisco did his final year research project batch experiment on Zn (II) adsorption on kaolin
at a solution pH of 5.8. The reaction volume was 0.025 L and mass of adsorbent was 0.1
gram.
ChE 422 / 542 Advanced Separation Processes
Mini-Project
Due: Friday, 30th Oct 2009
1. Scope of Work
Please provide a proposal for the design of a multiple-effect evaporator that fulfils the
specifications in Section 5 (Process Data) and includes the foll
1
Tutorial-5, ChE422 (Ad. Sepro-2nd semester)
On
Evaporation
Prob 1
Prob 2
A single-effect, vertical short-tube evaporator is used to concentrate a food-based
syrup from 10% to 40% at the rate of 2000 kg of feed per hour. The feed enters at
30C and a redu
1
Tutorial-3, ChE422 (Ad. Sepro-2nd semester)
On
Multicomponent Distillation
Problem 2:
Estimate the position of the feed point & number of stages for theButane-pentane
splitter defined by the compositions given in the table below:
Components
Feed (f)
Top
1
CLASS PROBLEM-13 , ChE422 (Ad. Sepro)
On
Membrane Separation
Prob-1
A 75 m thick polysulphone microporous membrane has an average porosity of =
0.35. Pure water flux through the membrane is 25 m 3/m2 hr at a pressure drop of 1.2
bar at 25 0C. The averag
1
CLASS PROBLEM-13 , ChE422 (Ad. Sepro)
On
Membrane Separation
Prob-1
A 75 m thick polysulphone microporous membrane has an average porosity of =
0.35. Pure water flux through the membrane is 25 m 3/m2 hr at a pressure drop of 1.2
bar at 25 0C. The averag
1
Solution of CLASS PROBLEM-12 , ChE422 (Ad. Sepro)
On
Drying
Prob-1
A rotary counter-current dryer is fed with ammonium nitrate containing 6% moisture
at the rate of 100 kg/min and discharges the nitrate with 0.2 % moisture. The air
enters at 135 0C and
1
CLASS PROBLEM-12 , ChE422 (Ad. Sepro)
On
Drying
Prob-1
A rotary counter-current dryer is fed with ammonium nitrate containing 6% moisture
at the rate of 100 kg/min and discharges the nitrate with 0.2 % moisture. The air
enters at 135 0C and leaves at 80
1
Solution of CLASS PROBLEM-11 , ChE422 (Ad. Sepro)
On
Drying
Prob-1
Where X = kg moisture / kg dry solid
N = kg moisture evaporated / hr m2
Rate of batch drying, N =
LS dX
A d
LS X 1 dX
A X 2 N
Drying time consists of a constant rate (C) and a falling r
1
CLASS PROBLEM-11 , ChE422 (Ad. Sepro)
On
Drying
Prob-1
Where X = kg moisture / kg dry solid
N = kg moisture evaporated / hr m2
Rate of batch drying, N =
LS dX
A d
LS X 1 dX
A X 2 N
Drying time consists of a constant rate (C) and a falling rate period (
1
CLASS PROBLEM-10 , ChE422 (Ad. Sepro)
On
Drying
Prob-1
A batch of solid for which the following table of data applies is to be dried from 25%
to 6% moisture under conditions identical to those for which the data were tabulated.
The initial weight of the
1
CLASS PROBLEM-10 , ChE422 (Ad. Sepro)
On
Drying
Prob-1
A batch of solid for which the following table of data applies is to be dried from 25%
to 6% moisture under conditions identical to those for which the data were tabulated.
The initial weight of the