Glider Design Report
The goal of this project is to design a remote-controlled glider without any propulsion
given the material. The objective of the design is to make the glider be able to reach a
long distance and be able to air-drop a payload accuratel
2) Explain briefly how the hydraulic circuit works
By turning on the power, the electric hydraulic pump begins to work, which adds
pressure to the fluid. The fluid then goes through the check valve (one direction flow).
The fluid will flow into the pressu
The objective of this glider design competition is for each group to
design and build a remote-controlled glider to achieve specific
1)Able to reach long distance.
2)Able to air-drop a payload accurately at a target.
The rudder of an aircraft is mainly used to steer the aircraft which will cause the
motion of yawing. On an aircraft, the rudder is used primarily to counter adverse yaw
which will be able to stabilize the aircraft. However, it is not the primarily contro
Result and discussion
Determine Poissons ratio of the cylindrical material.
1. Closed end cylindrical vessel
As for the closed end cylinder, the axial stress must exist to equilibrate the fluid
We could consider the force equilibrium.
P 2rl 2
Aerodynamics Experiment 1 (Run #1)
Wind tunnel @
Density of air
Viscosity of air