Subnetting is a process of dividing large network into the smaller networks based on layer 3 IP
address. Every computer on network has an IP address that represent its location on network.
Two version of IP addresses are available IPv4 and IPv6. In this a
VLAN is the logical grouping of layer two devices sharing same broadcast domain. VLAN can span
over the multiple physical locations. In this tutorial we will explain basic concept of VLAN such as
What VLAN is, Advantage of VLAN, VLAN membership; Static an
In this tutorial we will provide a step by step guide to configure the VLAN in Cisco switches with
example. We will start from creating VLANs. Once VLANs are created we will assign interfaces to it.
Later we will explain intra VLAN communication with Rout
RIP is a routing protocol which exchanges network information between routers dynamically.
It uses broadcast to share routing information. In this tutorial we will explain basic concept
of RIP protocol including the process it uses to share information wi
VLSM is a process of dividing an IP network into the subnets of different sizes without
wasting IP addresses. When we perform Subnetting, all subnets have the same number
of hosts, this is known as FLSM (Fixed length subnet mask). In FLSM all subnets use
RIP is a distance vector routing protocol. It shares routing information through the local
broadcast in every 30 seconds. In this tutorial we will explain RIP routing fundamentals with
examples such as routing metric, rip timers, split horizon rules, hold
In this tutorial we will setup a practice lab for VLAN in Packet Tracer. Same lab will be used for
the practice of VTP Server and Client configuration, DTP configuration, STP Configuration, Intra
VLAN communication and Router on Stick Configuration. This