1. Style period?
3. Term for style of sleeve?
4. Style period?
6. Terms for both jackets?
7. Style period?
8. Term for style of coat?
Victorian period; England
Fabric Hand & Drape
Fabric Hand or Handle
Individuals response to touch when fabrics are held in the hand.
ASTM D 123 terminology
Flexibility: ease of bending
Compressibility: ease of squeezing, the ability to compact under pressure
Fabric Tensile Test
Properties on how the force (or load) is developed in relation
to elongation (or extension) of a material when the material is
pulled in one direction.
It can also be presented as stre
Dyeability of Fibers
Fiber Identification: Methods
Differentiate between fiber groups
but not individual fibers
Safe & easy test to
Color loss occurred around the neckline/collar from the
exposure to sweat, lotion, and soils.
This color loss or retention of color can often be a determining
factor in the serviceability of a textile item.
A fabrics ability to resist a change in its dimensions either as
shrinkage or growth under conditions of refurbishing or care.
Affected by moisture and heat
ASTM D5034 Breaking Strength and Elongation of Textile
Tear & Abrasion
Ability of a fabric to wit
Lab 8. Colorfastness to crocking and appearance retention after washing:
colorfastness, wrinkle, and dimension after laundering
woven, direct dye
Dyed or Printed?
The general tolerance limits prescribed for the industrial effluent by the Bureau of
Indian Standards are applicable to textile processing effluents also. These are shown
Quiz - 5
1. During length measurement on Fibrograph,2.5% span length was found
to be 25 mm. It means
A.2.5% of fibres clamped are 25 mm is length
B.2.5% of fibres clamped are longer than 25 mm
C.2.5% of fibres clamped are 25 mm or longer
Quiz - 3
1) Bursting strength is normally carried out for
2) Pilling propensity on fabric surface increases with
A) Increase in length of fibre used in yam
Data Collection and Audit Preparation
Quiz - 4
1) The property most related to the thermal insulation of a blanket is
2) In the context of flat fabric abrasion resistance, choose the correct state
Quiz - 2
1) The thinnest Classimat fault among the following is
2) The value of breaking length in km (RKM) of a yarn is numerically equal to
(A)Tenacity in N/tex
(B)Breaking load in N
(C)Tenacity in gf/tex
Quiz - 1
1) Uniformity ratio for normal variety of cotton is in the range
(D) 9.0- 1.0
2) Uniformity ratio is the ratio of
(A) 50% span length and 2.5% span length
(B) 2.5% span length and 50% span lengt
DESIZING EFFLUENT TREATMENT
The relative contribution of the desizing effluent to the pollution load of a textile mill (name withheld) is
given in Table. In this case, the desizing ef
Water pollution due to discharge of liquid effluents from textile processing units into various
receiving bodies like public sewers, ponds, rivers and nullahs or on irrigation land poses serious
threat to the environm
Anaerobic digestion is a series of processes
Anaerobicdigestion isaseriesofprocessesinwhich microorganisms breakdown biodegradable