Experiment: Thermocouple/RTD Measurement & Calibration System
Objectives
To study the principal and operation of level measurement using the
thermocouple.
To study the principal and operation of level
EXPERIMENT 2
PERFORMANCE OF A
STEAM PLANT
CLB 2O703: Chemical Engineering Thermodynamics
OBJECTIVE:
1.
To determine the performance characteristics of a steam plant.
To demonstrate thermodynamic princ
LAB REPORT: EXPERIMENT 3
INTRODUCTION TO MICROSCOPE (CELL AND CELL ORGANELLES)
Summary
The objective of this experiment is to expose students on how to operate basic
compound microscope besides to edu
Objectives
1. To evaluate and study the performance of the shell and tube heat exchanger at various
operating conditions.
2. To determine heat load, log mean temperature difference (LMTD) and overall
Chi-Square Test: Categorical
Data Analysis
1
Learning Objectives
1.
Comparison of binomial proportion using Z and
2 Test.
2.
Explain 2 Test for Independence of 2 variables
3.
Explain The Fishers test
Linear Regression and
Correlation
Topics Covered:
Is there a relationship between x and y?
What is the strength of this relationship
Can we describe this relationship and use this to predict y from
x?
T-TESTS AND
ANALYSIS OF VARIANCE
ONE SAMPLE T-TEST
ONE SAMPLE T-TEST
Used to test whether the population mean is
different from a specified value.
Example: Is the mean amount of soda in a 20
oz. bottl
Discrete Probability Distributions
1
Random Variable
Random
experiment is an experiment with
random outcome.
Random variable is a variable related to a
random event
2
Discrete - Continuous
Random
v
EXPERIMENT 1
HEAT CONDUCTION
OBJECTIVES
To investigate Fouriers Law for the linear conduction of heat along a simple bar.
To investigate the influence of thermal insulation upon the conduction of he
Lab Manual
CBB20303 Biochemistry
EXPERIMENT 1:
Colorimetric analysis of reducing sugars
Pre-lab exercise:
Discuss
the
importance
of
biochemical
analysis
in
bioprocess technology. Reducing sugar is one
PROCEDURE
1. 6 crucible where 2 of it contain filter paper were left inside an oven at 103
C
until
dried to ensure that the weight recorded next will not effected by moisture on the
crucible.
2. Then,
1.0
ABSTRACT
Multi-Pump Test Rig has been designed to demonstrate the operating characteristics of
head-flow curves and efficiency of a series of different types of pumps, each having a broadly
simila
1.0 ABSTRACT:
Flow measurement is a critical element for water resources monitoring for various applications. The
objectives of the experiment are to demonstrate typical flow measurement devices for i
1.0 Objective
Determine the gas diffusion coefficient of acetone using the established Winkelmanns
method.
2.0 Summary
Gas diffusion occurred when diffusion of vapor takes place from volatile liquid(
7.0
TUTORIAL
1.
Give a definition of saponification.
Saponification is an organic chemical reaction that utilizes an alkali to cleave an ester into a
carboxylic acid and alcohol. As we will see shortl
Discussion
In this experiment, the objective of the experiment is to show that tile intensity of
radiation on a surface is inversely proportional to the square of the distance of the surface from
the
Tutorials
1. What is the pumper of the recrystallization process
To obtained a pure compound these impurities must be removed. Each is
removed in a separate step in the recrystallization procedure. B
INTRODUCTION
Nowdays, Technology is vital in todays world and makes everything easier. So,
many product of technology that have been made today by many company , like I
said to makes everything run sm
2. Absolute pressure : is zero-referenced against a perfect vacuum, so it is equal to gauge pressure plus
atmospheric pressure.
Gauge pressure : is zero-referenced against ambient air pressure, so it
Summary
The objective of this experiment is to study the density measurement and study the calibration
system. These experiments are divided into two parts which is first density measurement with heat
4.2 DISCUSSION
The aim of this experiment is to be introduced with the thermo-electric thermometers, to
understand the temperature current and voltage relationship, and to learn temperature
measuremen
RESULTS
3.1 TABLE 1: Density Measurement (Water, Heater OFF)
Specific Gravity (SG) read from hydrometer: _0.970kg/m3_
RUN I: OPEN TANK
A
Temperature (TG), C
B
Actual density (DI), kg/m3
C
Density from
OBJECTIVE
To evaluate and study the measurement of density using the differential pressure /
level transmitter
To check the calibration using a hand pump, DP calibrator, Multimeter and Hand Held
Termi
CONCLUSION
Based on the result, the objectives are achieved. The first objective is to evaluate and study
the measurement of density using the differential pressure / level transmitter and to check th
OBJECTIVES
To determines accuracy of the measured data
To provides traceability to the measurement
The resolution of the measuring instrument should be smaller than the
minimum unit of measurement
Summary
Many techniques have been developed for the measurement of pressure and vacuum.
Instruments used to measure pressure are called pressure gauges or vacuum gauges.
A manometer is an instrument t
Summary
The experiment was conducted to study ON/OFF temperature control of electric heaters
and finally the temperature control in the heat exchanger using PID controller. Based on the
theory, the ma
RECOMMENDATION
From the experiment, I recommend that the eyes of the observer may not be
parallel to the scale and will cause parallax error. To prevent this from happen
during the experiment, the eye
Conclusion
From the experiment that was done showed that the pressure have the main point in this
experiment. If we dont have accurate pressure its will affect the read of flow rate. Next, if
the temp