Name:
G Number:
Laboratory #2 ECE 332 1 Introduction
This laboratory constists of two parts. In the rst part you will verify the function of the basic gates. In the second part you will build a large
Name:
G Number:
Pre-Laboratory #Finite State Machines ECE 332 1 Introduction
This pre-lab is divided into two parts. Part one consists of questionare section. You have to answer questions on Synchrono
Name:
G Number:
Pre-Laboratory #Boolean Expressions ECE 332 1 Introduction
This pre-lab is divided into two parts. In part one you will build a circuit for providing inputs to your CPLD board on your
Name:
G Number:
Laboratory #Propagation Delay and Power Measurement ECE 332 1 Introduction
In this lab you are going to observe the propagation delay 2-input AND gate implemented using a TTL IC and a
Name:
G Number:
Laboratory #Multiplexers and Demultiplexers ECE 332 1 Introduction
In this laboratory you will explore the functionality of Multiplexers or Muxes and De-Multiplexers or De-mux on the C
Name:
G Number:
Laboratory #Latches and Flip-Flops ECE 332 1 Introduction
In this laboratory you will explore the functionality of Latches and Flip-Flops on the Cool Runner-2 CPLD board. Parts of this
Name:
G Number:
Laboratory #Shift Register ECE 332 1 Introduction
In this laboratory you will design a 4-bit parallel input/parallel output shift left register and implement it on the Cool Runner-2 CP
Name:
G Number:
Laboratory #Finite State Machines ECE 332 1 Introduction
In this laboratory you will design a a Synchronous sequential Moore machine which implements a 3-bit binary modulo-7 counter an
ECE 332 (Section 202)
Lab 6, Adder Circuits
Morteza Eskandari
October 19, 2016
OBJECTIVES:
The main objectives of this lab was to understand how a 2-bit half-adder and 3-bit
full adder works and how
ECE 332 (Section 202)
Lab 5, BCD-to-7 Segment Decoder
Morteza Eskandari
October 12, 2016
OBJECTIVES:
The main objectives of this lab was to understand how a 7 Segment Decoder
works in order to comple
Name:
G Number:
Laboratory #Types of Adders ECE 332 1 Introduction
In this laboratory you will compare Ripple Carry adder and a combination of Ripple and Carry Look-Ahead adder in terms of speed and e
Name:
G Number:
Laboratory #Binary Adder Circuits ECE 332 1 Introduction
In this laboratory you will design and simulate a Half Adder, Full Adder using TTL gates and simulate the functionality of Half
Name:
G Number:
Pre-Laboratory #BCD-to-7 Segment Decoder ECE 332 1 Introduction
The topic of Lab 5 is decoders. In this pre-lab you will design a 4-bit BCD to 7-Segment Decoder, simplify the logic and
Name:
G Number:
Pre-Laboratory #Binary Adder Circuits ECE 332 1 Introduction
This pre-lab consists of two parts. In part one of pre-lab you are going to do the following tasks: 1. Design a Half Adder
Name:
G Number:
Pre-Laboratory #Types of Adders ECE 332 1 Introduction
This pre-lab consists of two parts. Part one of this pre-lab is a reading assignment. You can use the prescribed text book or any
Name:
G Number:
Pre-Laboratory #Propagation Delay and Structural Coding ECE 332 1 Introduction
This pre-lab is divided into two parts. In part one you will answer questions regarding noise margin and
Name:
G Number:
Pre-Laboratory #Multiplexers and De multiplexers ECE 332 1 Introduction
In this pre-lab you are going to explore the functionality of Multiplexers (Muxes) and De-Multiplexers (De-Muxes
Name:
G Number:
Pre-Laboratory #Latches and Filp-Flops ECE 332 1 Introduction
This pre-lab is divided into two parts. Part one consists of reading assignment. You can use the prescribed text book or t
Name:
G Number:
Pre-Laboratory #Shift Register ECE 332 1 Introduction
This pre-lab is divided into two parts. Part one consists of questionare section . You have to answer questions on Shift Register
Name:
G Number:
Laboratory #Boolean Expressions ECE 332 1 Introduction
In this lab you are going to write the VHDL code for the Boolean expressions and program the CPLD to implement the design describ
Name:
G Number:
Laboratory #BCD-to-7 Segment Decoder ECE 332 1 Introduction
In this laboratory you will design and simulate a 4 bit BCD to 7 Segment decoder and simulate its functionality on the Cool
Laboratory Report Format
1. Cover Page
(a) Course Number: ECE 332
(b) Experiment Number and Title
(c) Your Name
(d) Date of Submission
2. Objectives and Theoretical Background
State the objective and