Plot the output characteristics (IC vs VCE) if VCE is varied from 0 to 10V in steps of 0.02V and I B
is varied from 0 to 1mA in steps 200A.
Q1 2 1 0 Q2N2222A
.model Q2N2222A NPN (Is=14.34f Xti=3 Eg=1.11 Vaf=74.03 Bf=255.9 Ne=1.307
Determine the maximum gain, 3dB gain, lower and upper cutoff frequencies and bandwidth of
two Stage RC Coupled Amplifier by performing the AC analysis and plot the input output
waveform using transient analysis.
.MODEL Q2N2222 NPN(IS=2.56E-14
QUESTION 1A dc circuit shown in fig 3 use PSpice to calculate and print
Voltage gain AV=V(2,4)/Vin
The input resistance Rin=Vin/Iin
Thevenins resistance Rout =Rth between nodes 2 and 4
Thevenins voltage Vth between node 2 and 4.
Plot frequency response of the low pass first order RC circuit for a cut off frequency of 5kHz using
Pspice A/D. Plot the gain Vo/Vin and phase shift against frequency. (Use C=0.1uF)
Higher cutoff frequency,
QUESTION 1Transient response of an RLC circuit with a sinusoidal input voltage
Plot the current through the circuit and voltage at node 3 and analyze the circuit with different values of L and
C (L=10uH & C=5uF, L=100uH & C=50uF).
AeroClub Summer Project (ACSP) 2015
A STUDY ON ROVER SUSPENSION SYSTEM
INTERNSHIP PROJECT REPORT
Kinjal Chauhan (SC14B148)
Nikunj Gupta (SC14B105)
Puneet Anand (SC14B044)
Indian Institute of Space Science and Technology