Introduction to Separation Processes
In most of the chemical engineering systems, separation processes are integral part of
the entire process flowsheet.
If we consider a reactive system, where, certain products are of primary interes
NATIONAL INSTITUTE OF TECHNOLOGY KARNATAKA, SURATHKAL, D.K.
FLUID AND FLUID PARTICLES LAB.
1. Come prepared for the experiment to be conducted in the class
2. Bring the essential graph sheets (ordinary, log-log or semi log), as
required for t
The plate and frame press
This type of filter consists of plates and frames arranged alternately and supported
pair of rails The plates have a ribbed surface and the edges stand slightly proud and
are carefully machined. The hollow frame is separated
DEPARTMENT OF CHEMICAL ENGINEERING
NATIONAL INSTITUTE OF TECHNOLOGY
SURATHKAL - 575025
HEAT TRANSFER LAB MANUAL
(July- November, 2015)
List of Experiments
Black Liquor Devolatilization And
Swelling- A Detailed Droplet Model
And Experimental Validation
Mika Jarvinen, Ron Zevenhoven, Esa Vakkilainen, Mikael Forssen
ANJANA THIMMAIAH - 13CH09
KRATHIKA BHAT - 13CH22
WHAT IS BLACK LIQUOR?
The separation of a mixture using flotation methods depends on
differences in the surface properties of the materials involved. If
the mixture is suspended in an aerated liquid, the gas bubbles will
tend to adhere preferentially to one o
Course Code: CH354
Chemical Engineering Department
LIST OF EXPERIMENTS
2.ATMOSPHERIC TRAY DRIER
3.CROSS CURRENT LEACHING
5.COUNTER CURRENT LEACHING
Flow measuring devices:
1) Variable area type
2) The drag effect type and
3) The positive displacement type.
VARIABLE AREA FLOW METER:
Change in area is deliberately introduced which causes change in the velocity of the flowing
fluid. This velocity change
A mixture of gaseous, liquid and solid hydrocarbon type compounds that can be separated
into a variety of different boiling point fractions and that occur naturally in sedimentary
rock deposits through-out the world
Thermal Power plants are the major source of generation of electricity for any developing
country. Around 60% of electricity generation in our country is met by thermal power plants.
Fuel is blown into the combustible chamber of the boiler where