The Solid State of Matter

Learning Objectives

By the end of this section, you will be able to:

  • Define and describe the bonding and properties of ionic and molecular metallic and covalent network crystalline solids
  • Describe the main types of crystalline solids: ionic solids, metallic solids, covalent network solids, and molecular solids
  • Explain the ways in which crystal defects can occur in a solid


When most liquids are cooled, they eventually freeze and form crystalline solids, solids in which the atoms, ions, or molecules are arranged in a definite repeating pattern. It is also possible for a liquid to freeze before its molecules become arranged in an orderly pattern. The resulting materials are called amorphous solids or noncrystalline solids (or, sometimes, glasses). The particles of such solids lack an ordered internal structure and are randomly arranged (Figure 1).

Two images are shown and labeled, from left to right, “Crystalline” and “Amorphous.” The crystalline diagram shows many circles drawn in rows and stacked together tightly. The amorphous diagram shows many circles spread slightly apart and in no organized pattern. Figure 1. The entities of a solid phase may be arranged in a regular, repeating pattern (crystalline solids) or randomly (amorphous).


Metals and ionic compounds typically form ordered, crystalline solids. Substances that consist of large molecules, or a mixture of molecules whose movements are more restricted, often form amorphous solids. For examples, candle waxes are amorphous solids composed of large hydrocarbon molecules. Some substances, such as boron oxide (shown in Figure 2), can form either crystalline or amorphous solids, depending on the conditions under which it is produced. Also, amorphous solids may undergo a transition to the crystalline state under appropriate conditions.

Two drawings are shown. On the left appear five separate clusters of molecules. On the right, the clusters have joined to form one orderly and bigger substance. Figure 2. (a) Diboron trioxide, B2O3, is normally found as a white, amorphous solid (a glass), which has a high degree of disorder in its structure. (b) By careful, extended heating, it can be converted into a crystalline form of B2O3, which has a very ordered arrangement.


Crystalline solids are generally classified according the nature of the forces that hold its particles together. These forces are primarily responsible for the physical properties exhibited by the bulk solids. The following sections provide descriptions of the major types of crystalline solids: ionic, metallic, covalent network, and molecular.

Ionic Solids

This figure shows large purple spheres bonded to smaller green spheres in an alternating pattern. The spheres are arranged in a cube. Figure 3. Sodium chloride is an ionic solid.


Ionic solids, such as sodium chloride and nickel oxide, are composed of positive and negative ions that are held together by electrostatic attractions, which can be quite strong (Figure 3). Many ionic crystals also have high melting points. This is due to the very strong attractions between the ions—in ionic compounds, the attractions between full charges are (much) larger than those between the partial charges in polar molecular compounds. This will be looked at in more detail in a later discussion of lattice energies. Although they are hard, they also tend to be brittle, and they shatter rather than bend. Ionic solids do not conduct electricity; however, they do conduct when molten or dissolved because their ions are free to move. Many simple compounds formed by the reaction of a metallic element with a nonmetallic element are ionic.

Metallic Solids

This figure shows large brown spheres arranged in a cube. Figure 4. Copper is a metallic solid.


Metallic solids such as crystals of copper, aluminum, and iron are formed by metal atoms Figure 4. The structure of metallic crystals is often described as a uniform distribution of atomic nuclei within a “sea” of delocalized electrons. The atoms within such a metallic solid are held together by a unique force known as metallic bonding that gives rise to many useful and varied bulk properties. All exhibit high thermal and electrical conductivity, metallic luster, and malleability. Many are very hard and quite strong. Because of their malleability (the ability to deform under pressure or hammering), they do not shatter and, therefore, make useful construction materials. The melting points of the metals vary widely. Mercury is a liquid at room temperature, and the alkali metals melt below 200 °C. Several post-transition metals also have low melting points, whereas the transition metals melt at temperatures above 1000 °C. These differences reflect differences in strengths of metallic bonding among the metals.

Covalent Network Solid

Covalent network solids include crystals of diamond, silicon, some other nonmetals, and some covalent compounds such as silicon dioxide (sand) and silicon carbide (carborundum, the abrasive on sandpaper). Many minerals have networks of covalent bonds. The atoms in these solids are held together by a network of covalent bonds, as shown in Figure 5. To break or to melt a covalent network solid, covalent bonds must be broken. Because covalent bonds are relatively strong, covalent network solids are typically characterized by hardness, strength, and high melting points. For example, diamond is one of the hardest substances known and melts above 3500 °C.

Four substances are illustrated, each with a rendering of one molecule, and below that, a rendering of how the molecules stack together. First is diamond, packed densely; then silicone dioxide, orderly but with large gaps between moledules; then silicon carbide, then carbon, shown in four flat layers stacked together. Figure 5. A covalent crystal contains a three-dimensional network of covalent bonds, as illustrated by the structures of diamond, silicon dioxide, silicon carbide, and graphite. Graphite is an exceptional example, composed of planar sheets of covalent crystals that are held together in layers by noncovalent forces. Unlike typical covalent solids, graphite is very soft and electrically conductive.


Molecular Solid

Molecular solids, such as ice, sucrose (table sugar), and iodine, as shown in Figure 6, are composed of neutral molecules. The strengths of the attractive forces between the units present in different crystals vary widely, as indicated by the melting points of the crystals. Small symmetrical molecules (nonpolar molecules), such as H2, N2, O2, and F2, have weak attractive forces and form molecular solids with very low melting points (below −200 °C). Substances consisting of larger, nonpolar molecules have larger attractive forces and melt at higher temperatures. Molecular solids composed of molecules with permanent dipole moments (polar molecules) melt at still higher temperatures. Examples include ice (melting point, 0 °C) and table sugar (melting point, 185 °C).

Two drawings are shown. On the left, red and grey molecules are densely stacked in a 3-D drawing to represent carbon dioxide. On the right, purple molecules are scattered randomly to represent iodine. Figure 6. Carbon dioxide (CO2) consists of small, nonpolar molecules and forms a molecular solid with a melting point of −78 °C. Iodine (I2) consists of larger, nonpolar molecules and forms a molecular solid that melts at 114 °C.


Properties of Solids

A crystalline solid, like those listed in Table 1, has a precise melting temperature because each atom or molecule of the same type is held in place with the same forces or energy. Thus, the attractions between the units that make up the crystal all have the same strength and all require the same amount of energy to be broken. The gradual softening of an amorphous material differs dramatically from the distinct melting of a crystalline solid. This results from the structural nonequivalence of the molecules in the amorphous solid. Some forces are weaker than others, and when an amorphous material is heated, the weakest intermolecular attractions break first. As the temperature is increased further, the stronger attractions are broken. Thus amorphous materials soften over a range of temperatures.

Table 1. Types of Crystalline Solids and Their Properties
Type of Solid Type of Particles Type of Attractions Properties Examples
ionic ions ionic bonds hard, brittle, conducts electricity as a liquid but not as a solid, high to very high melting points NaCl, Al2O3
metallic atoms of electropositive elements metallic bonds shiny, malleable, ductile, conducts heat and electricity well, variable hardness and melting temperature Cu, Fe, Ti, Pb, U
covalent network atoms of electronegative elements covalent bonds very hard, not conductive, very high melting points C (diamond), SiO2, SiC
molecular molecules (or atoms) IMFs variable hardness, variable brittleness, not conductive, low melting points H2O, CO2, I2, C12H22O11

Graphene: Material of the Future

Carbon is an essential element in our world. The unique properties of carbon atoms allow the existence of carbon-based life forms such as ourselves. Carbon forms a huge variety of substances that we use on a daily basis, including those shown in Figure 7. You may be familiar with diamond and graphite, the two most common allotropes of carbon. (Allotropes are different structural forms of the same element.) Diamond is one of the hardest-known substances, whereas graphite is soft enough to be used as pencil lead. These very different properties stem from the different arrangements of the carbon atoms in the different allotropes.

Three photographs are paired with corresponding diagrams. On the left is a photo of a diamond, illustrated with its dense molecular structure. In the middle is a photo of graphite, with four layers of molecules illustrated. On the right is an illustration of graphite surface, both large and zoomed in. The zoomed image illustrates 1.4 x 10 to the negative 10 m distance between center of atoms. Figure 7. Diamond is extremely hard because of the strong bonding between carbon atoms in all directions. Graphite (in pencil lead) rubs off onto paper due to the weak attractions between the carbon layers. An image of a graphite surface shows the distance between the centers of adjacent carbon atoms. (credit left: modification of work by Steve Jurvetson; credit middle: modification of work by United States Geological Survey)


You may be less familiar with a recently discovered form of carbon: graphene. Graphene was first isolated in 2004 by using tape to peel off thinner and thinner layers from graphite. It is essentially a single sheet (one atom thick) of graphite. Graphene, illustrated in Figure 8, is not only strong and lightweight, but it is also an excellent conductor of electricity and heat. These properties may prove very useful in a wide range of applications, such as vastly improved computer chips and circuits, better batteries and solar cells, and stronger and lighter structural materials. The 2010 Nobel Prize in Physics was awarded to Andre Geim and Konstantin Novoselov for their pioneering work with graphene.

Drawings of a flat sheet of graphene, a buckyball form, a nanotube, and stacked layers. Figure 8. Graphene sheets can be formed into buckyballs, nanotubes, and stacked layers.


Crystal Defects

In a crystalline solid, the atoms, ions, or molecules are arranged in a definite repeating pattern, but occasional defects may occur in the pattern. Several types of defects are known, as illustrated in Figure 9. Vacancies are defects that occur when positions that should contain atoms or ions are vacant. Less commonly, some atoms or ions in a crystal may occupy positions, called interstitial sites, located between the regular positions for atoms. Other distortions are found in impure crystals, as, for example, when the cations, anions, or molecules of the impurity are too large to fit into the regular positions without distorting the structure. Trace amounts of impurities are sometimes added to a crystal (a process known as doping) in order to create defects in the structure that yield desirable changes in its properties. For example, silicon crystals are doped with varying amounts of different elements to yield suitable electrical properties for their use in the manufacture of semiconductors and computer chips.

A drawing shows a square formed out of green spheres. The square is interrupted in three places: a red sphere like the green ones marks a interstitial impurity; a yellow sphere larger than the green ones marks a substitution impurity atom, and affects the order in the top right order of the square around it; and a missing green sphere represents a vacancy near the bottom left corner. Figure 9. Types of crystal defects include vacancies, interstitial atoms, and substitutions impurities.


Key Concepts and Summary

Some substances form crystalline solids consisting of particles in a very organized structure; others form amorphous (noncrystalline) solids with an internal structure that is not ordered. The main types of crystalline solids are ionic solids, metallic solids, covalent network solids, and molecular solids. The properties of the different kinds of crystalline solids are due to the types of particles of which they consist, the arrangements of the particles, and the strengths of the attractions between them. Because their particles experience identical attractions, crystalline solids have distinct melting temperatures; the particles in amorphous solids experience a range of interactions, so they soften gradually and melt over a range of temperatures. Some crystalline solids have defects in the definite repeating pattern of their particles. These defects (which include vacancies, atoms or ions not in the regular positions, and impurities) change physical properties such as electrical conductivity, which is exploited in the silicon crystals used to manufacture computer chips.

Exercises

  1. What types of liquids typically form amorphous solids?
  2. At very low temperatures oxygen, O2, freezes and forms a crystalline solid. Which best describes these crystals?

    1. ionic
    2. covalent network
    3. metallic
    4. amorphous
    5. molecular crystals


  3. As it cools, olive oil slowly solidifies and forms a solid over a range of temperatures. Which best describes the solid?

    1. ionic
    2. covalent network
    3. metallic
    4. amorphous
    5. molecular crystals


  4. Explain why ice, which is a crystalline solid, has a melting temperature of 0 °C, whereas butter, which is an amorphous solid, softens over a range of temperatures.
  5. Identify the type of crystalline solid (metallic, network covalent, ionic, or molecular) formed by each of the following substances:

    1. SiO
    2. KCl
    3. Cu
    4. CO
    5. C (diamond)
    6. BaSO
    7. NH
    8. NH4F
    9. C2H5OH


  6. Identify the type of crystalline solid (metallic, network covalent, ionic, or molecular) formed by each of the following substances:

    1. CaCl
    2. SiC
    3. N
    4. Fe
    5. C (graphite)
    6. CH3CH2CH2CH
    7. HCl
    8. NH4NO
    9. K3PO4


  7. Classify each substance in the table as either a metallic, ionic, molecular, or covalent network solid:

    Substance Appearance Melting Point Electrical Conductivity Solubility in Water
    X lustrous, malleable 1500 °C high insoluble
    Y soft, yellow 113 °C none insoluble
    Z hard, white 800 °C only if melted/dissolved soluble
  8. Classify each substance in the table as either a metallic, ionic, molecular, or covalent network solid:

    Substance Appearance Melting Point Electrical Conductivity Solubility in Water
    X brittle, white 800 °C only if melted/dissolved soluble
    Y shiny, malleable 1100 °C high insoluble
    Z hard, colorless 3550 °C none insoluble
  9. Identify the following substances as ionic, metallic, covalent network, or molecular solids:

    1. Substance A is malleable, ductile, conducts electricity well, and has a melting point of 1135 °C.
    2. Substance B is brittle, does not conduct electricity as a solid but does when molten, and has a melting point of 2072 °C.
    3. Substance C is very hard, does not conduct electricity, and has a melting point of 3440 °C.
    4. Substance D is soft, does not conduct electricity, and has a melting point of 185 °C.


  10. Substance A is shiny, conducts electricity well, and melts at 975 °C. Substance A is likely a(n):

    1. ionic solid
    2. metallic solid
    3. molecular solid
    4. covalent network solid


  11. Substance B is hard, does not conduct electricity, and melts at 1200 °C. Substance B is likely a(n):

    1. ionic solid
    2. metallic solid
    3. molecular
    4. covalent network solid








Glossary

amorphous solid: (also, noncrystalline solid) solid in which the particles lack an ordered internal structure

covalent network solid: solid whose particles are held together by covalent bonds

crystalline solid: solid in which the particles are arranged in a definite repeating pattern

interstitial sites: spaces between the regular particle positions in any array of atoms or ions

ionic solid: solid composed of positive and negative ions held together by strong electrostatic attractions

metallic solid: solid composed of metal atoms

molecular solid: solid composed of neutral molecules held together by intermolecular forces of attraction

vacancy: defect that occurs when a position that should contain an atom or ion is vacant

Licenses and Attributions

More Study Resources for You

Show More