Given the well data in Appendix A, and assuming a 40 acre drainage area, calculate:
a. the time required to
reach pseudosteady state.
b. the flow rate for transient flow from time = 0 to time to pseudosteady state at wellbore flowing
pressures ranging from 0 to initial reservoir pressure. Display 5 equal increments for time and
10 for wellbore flowing pressure. Plot the corresponding IPR curves.
c. the flow rate for pseudosteady state, if the flow boundary pressure equals the initial reservoir
pressure and the wellbore flowing pressure is 500 psi.
d. the IPR curve for a reservoir at pseudosteady-state condition with average reservoir pressure
equal to 5000 psi at the time of transition. Repeat for average reservoir pressures of 4500 and
Recently Asked Questions
- numerical methods civil engineering MatLAb. Need help with all questions.
- Please refer to the attachment to answer this question. This question was created from 220F11_bending.
- Consider the shear design of a beam of 14'' in width and 26'' in effective depth. The beam supports a factored load of 16 kips/ft as well as a central,