Please see the attached file for the fully formatted problem(s).
The wall of a refrigerator is costructed of fiberglass insulation sandwiched between two layers of sheet metal.The minimum thickness of insulation that needs to be used in the wall in order to avoid condensation on the outer surface to be determined.
given that
Thermal conductivity for sheet metal = 15.5 W/m deg C
Thermal conductivity for fiberglass insulation = 0.035 W/m deg C
Problem.
The wall of a refrigerator is constructed of fiberglass insulation
sandwiched between two layers of sheet metal. The minimum thickness of
insulation that needs to be used in the wall in order to avoid
condensation on the outer surface to be determined.
Given that
Thermal conductivity for sheet metal = 15.5 W/m 0C
Thermal conductivity for fiberglass insulation = 0.035 W/m 0C
Take Room temperature = 250C
Surrounding Temperature = 20 0C
Temperature in refrigerator = 30C
Heat transfer coefficient h = 9 W/m2 0C
The wall of a refrigerator is costructed of fiberglass insulation sandwiched between two layers of sheet metal.The minimum thickness of insulation that needs to be used in the wall in order to avoid condensation on the outer surface to be determined.
given that
Thermal conductivity for sheet metal = 15.5 W/m deg C
Thermal conductivity for fiberglass insulation = 0.035 W/m deg C
Problem.
The wall of a refrigerator is constructed of fiberglass insulation
sandwiched between two layers of sheet metal. The minimum thickness of
insulation that needs to be used in the wall in order to avoid
condensation on the outer surface to be determined.
Given that
Thermal conductivity for sheet metal = 15.5 W/m 0C
Thermal conductivity for fiberglass insulation = 0.035 W/m 0C
Take Room temperature = 250C
Surrounding Temperature = 20 0C
Temperature in refrigerator = 30C
Heat transfer coefficient h = 9 W/m2 0C
Recently Asked Questions
- How did the Islamic empire of the Abbasid era mirror some of the features of the late Roman Empire?
- A 35 mm camera equipped with a 70 m focal length lens is used to photograph a tree 24 m tall. The aperture of the lens is set to f/8. A 32 mm high image of
- Please refer to the attachment to answer this question. This question was created from _fva_w3.docx.