
Flood Risk map modelling in ArcGis

How are numerous sections identified as to their position on major view?

Susan's 12.0 baby brother Paul sits on a mat. Susan pulls the mat across the floor using a rope that is angled 30 degrees above the floor. The tension is a constant 31.0 and the coefficient of friction is 0.210. Use work and energy to find Paul's speed after being pulled 3.30 .

Nice to join with you!

A threespan continuous H20 timber beam with three equal spans of 1.3 mts supports a uniform load of 22.46 KN/m^2 with intensity q = 20.214 KN/m. Determine all reactions of this beam and draw the shear force and bending moment diagrams labelling all critical ordinates.

3. The NAAQs for particulate matter less than 10 microns (PM10) are an annual average concentration of 50 mg/m3 and a daily maximum of 150 mg/m3. For the region surrounding the city of Middleburgh, the typical background concentration of PM10 is 30mg/m3. The city has dimensions of 75 km x 75 km...

a single rectangular sedimentation basin is to be designed to treat a water flow of 1.5 MGD at the design overflow rate of 900 gpd/ ft^2. a.) Determine the basin dimensions (width, length, depth) for a detention time of 3 hours and a length to width ratio of 4 to 1. (use English units)

consider the design of wastewater treatment plant for a community wiyh average daily and peak hourly wastewater design flows of 2.0 mgd. the raw sewage has an average of 230 mg/l BOD5 and 260 mg/l of suspended solids.

Suppose that a line has been observed ten times using the same equipment and procedures. The results are shown in column (1) of the following table. The corrected systematic errors are shown in column 2. Compute the most probable value for the line length, its standard deviation, and error.

A distance of 200 ft must be taped in a manner to ensure a standard deviation smaller than 0.03 ft. What must be the standard deviation per 100 ft tape length to achieve the desired precision?
Ask a new Civil Engineering Question
Tips for Asking Questions
 Provide any and all relevant background materials. Attach any necessary files to ensure your Tutor has all the required information to answer your question as completely as possible.
 Set a compelling price. While our Tutors are eager to answer your questions, offering a compelling price speeds up the process by avoiding any unnecessary price negotiations.
Sample Questions
 1. Why is the time value of money important for the evaluation of engineering projects? Can you share some examples where this is the case?
 2. What are the reasons for enhancing drainage and what is an example situation where it is required? Explain some of the detrimental effects of drainage. Describe the types of drainage system indicating suitability criteria.